Mechanical properties of PC and ABS alloy at minus 30 degrees centigrade

PC and ABS alloy is an engineering plastic that usually has good mechanical properties, including high strength, rigidity and impact resistance. Because it contains ABS components, ABS can maintain good ductility at low temperatures. At the same time, PC materials have excellent low-temperature resistance. PC. And ABS materials still have good performance at minus 30°C. The following are the possible mechanical properties of PC ABS alloys that we have summarized for you at minus 30℃:

1.Strength: PC and ABS alloy usually still has good strength at low temperatures, but its strength may be slightly reduced. This means that it still has relatively high tensile, flexural, and compressive strengths, but may not be as high as it would be at normal temperatures.

2.Rigidity: PC and ABS alloy usually maintains high rigidity at low temperatures. This means that it maintains shape stability and is less prone to deformation or deformation.

3.Impact resistance: PC and ABS alloys generally maintain high impact resistance at low temperatures, especially for impact loads. This is an advantage in cold climates where it is used to withstand shock and vibration.

4.Creep: The creep of plastic materials may increase at low temperatures, which means that PC and ABS alloys may deform faster under sustained loading.

The low-temperature-resistant PC and ABS alloy produced by Primetech Plastics can still maintain good impact resistance at extreme temperatures of -30°C and -40°C. It has been widely used in new energy vehicle charging guns, rail transit equipment, low-temperature Cold storage components and other products.

Qingdao Primetech Plastic was established in 2007 and has 16 years of experience in the production of modified plastics, dyeing and color masterbatch. It focuses on one-to-one customized development and mature formulas to ensure that products can accurately match customer requirements. Including PC and ABS alloy, halogen-free flame-retardant engineering plastics, glass fiber reinforced modified materials, antistatic materials, medical grade color masterbatch, PET fiber grade color masterbatch, fully biodegradable plastics, ASA and PE wood-plastic co-extrusion materials, etc. If you have needs for low-temperature-resistant PC and ABS alloy, please call us for consultation. You can also consult/leave a message online to communicate directly with customer service.